About this item

【Main Tips】: Set the lock screen state of unlocking the phone to avoid the screen being off when diving. iPhone: Settings - Display & Brightness - Auto Lock - Never. Android phone is different, you need to set the screen to automatically close the interface and change it to never close. Then open the camera program and install the phone. The yellow button paddle should be aimed at the sound button of the mobile phone, and test whether the shutter button drives the mobile phone to take pictures.

【Small Tips】: After installing the phone, please open the vent-hole, press the diving case screen to exhaust the air, and install the screws, so that the diving screen has a higher touch sensitivity. Before diving, we recommend turning on your cell phone camera to make it convenient to take pictures and record videos.

Professional Diving Phone Case: Support 15 meters (50 feet) water depth, you can use the front or rear camera to take clear pictures and videos. It is recommended to turn on the camera or photography camera in advance, the water pressure may affect some touch screen effects.

360 Degree Full Protection: Diving Case body is made of high toughness PC and TPU material; Inside the case, there are shock-absorption and four anti-drop angle design.

Support tripod: 1/4 inch standard screw

Equipped with wrist lanyard: This diving case is equipped with a wrist strap, so that diving is more convenient to carry and take pictures.

Package List:

1.1 x Diving Case

Important hint:

1. Phone models below 4.7 inches require a foam pad to use the camera function. The instruction manual explains how to use the foam pad.I

2. f the plus and minus keys are on the left or right side of the phone and it supports camera and video functions, then this diving case also supports it, although we do not list these phone models（Open your phone camera interface, press the plus or minus button, the phone will automatically take a photo.

3. lease do a waterproof test before diving. t the paper towel into the diving shell, put it in the water after sealing, take it out and dry the diving case after ten minutes, check if there is water in, and whether the paper towel is wet.